Remote hotend fan, part 2
In part one of my creating a remote hotend fan system, I made an interface to control a brushless high-power hairdryer fan with a normal PWM fan output. Next...
Posts by Tag
- delta 5
- extruder 3
- PC 2
- electronics 2
- remote_hotend_fan 2
- staticman 1
- tools 1
- monitor 1
- software 1
- FreeBSD 1
- sia 1
- BIOS 1
- ME 1
- proliant 1
delta
Brushless fan PWM to 5VDC interface
The Anycubic Kossel printer came with a J5 type hotend, which is heavy, big, and just not really good. The flow rate is rather bad. I changed it with a mozzi...
The ultimate 3D printer Z probe
I really got tired of the Anycubic Kossel Z probe.
progress on the 3D printer parts design
A preview at the various new parts I am designing for my delta 3D printer. Hopefully these will allow the printer to be much faster as they will be much ligh...
(possibly) revolutionary extruder
I have been working on a filament extruder (and print head platform) for my Anycubic Kossel linear plus 3D printer.
extruder
The ultimate 3D printer Z probe
I really got tired of the Anycubic Kossel Z probe.
progress on the 3D printer parts design
A preview at the various new parts I am designing for my delta 3D printer. Hopefully these will allow the printer to be much faster as they will be much ligh...
(possibly) revolutionary extruder
I have been working on a filament extruder (and print head platform) for my Anycubic Kossel linear plus 3D printer.
PC
Disabling hardware RAID in HP proliant controller
I have a proliant G6 and a G7 which both use the p410i raid controller so I tried to follow this guide as well as the one linked to in order to configure my ...
Revive a 30-min rebooting asus laptop
I recovered an asus laptop for free (Asus n550JK). After adding an SSD and maxing the RAM, it makes for a very usable Laptop. Not a speed demon, but with the...
electronics
Brushless fan PWM to 5VDC interface
The Anycubic Kossel printer came with a J5 type hotend, which is heavy, big, and just not really good. The flow rate is rather bad. I changed it with a mozzi...
Best way to cut veroboard track
I think I have devised the best way to cut veroboard tracks. It bothered me that using a cutter is tedious and not precise and often leaves small bits of cop...
remote_hotend_fan
Remote hotend fan, part 2
In part one of my creating a remote hotend fan system, I made an interface to control a brushless high-power hairdryer fan with a normal PWM fan output. Next...
Brushless fan PWM to 5VDC interface
The Anycubic Kossel printer came with a J5 type hotend, which is heavy, big, and just not really good. The flow rate is rather bad. I changed it with a mozzi...
staticman
Staticman comments
Well, when I started with Jekyll to create my blog, one of the contributing factors in so choosing was the comment system. Staticman, notably, allows comment...
tools
I break, I fix
I broke my little proxxon drill.
monitor
Hack a Benq monitor stand
We have a Benq monitor set on its side. It is stuck with magnets to the side of the desk to stand it in portrait orientation. It’s one of those monitors with...
software
Sia Network FreeBSD update
Sia is an interesting distributed storage network.
FreeBSD
Sia Network FreeBSD update
Sia is an interesting distributed storage network.
sia
Sia Network FreeBSD update
Sia is an interesting distributed storage network.
BIOS
Revive a 30-min rebooting asus laptop
I recovered an asus laptop for free (Asus n550JK). After adding an SSD and maxing the RAM, it makes for a very usable Laptop. Not a speed demon, but with the...
ME
Revive a 30-min rebooting asus laptop
I recovered an asus laptop for free (Asus n550JK). After adding an SSD and maxing the RAM, it makes for a very usable Laptop. Not a speed demon, but with the...
proliant
Disabling hardware RAID in HP proliant controller
I have a proliant G6 and a G7 which both use the p410i raid controller so I tried to follow this guide as well as the one linked to in order to configure my ...